Ressources

Consultez nos ressources gratuites.

Contactez-nous
Industrial facility with large overhead metal pipes supported by red metal framework under a clear blue sky.

Guides techniques

Tetra a publié une série de guides, disponibles à la commande.

Cover of the HRSG Inspection Planning Guide (2nd Edition)

HRSG Inspection Planning Guide (2nd Edition)

L'inspection fait partie de la maintenance courante de toute chaudière de récupération (HRSG). Des inspections visuelles sont réalisées à intervalles réguliers, conformément aux exigences des organismes de réglementation et des assureurs.

Cover of the HRSG Tube Failure Diagnostic Guide (3rd Edition)

HRSG Tube Failure Diagnostic Guide (3rd Edition)

Les tubes des chaudières de récupération (HRSG) permettent d'extraire l'énergie utile de la chaleur des gaz d'échappement des turbines à gaz dans les centrales à cycle combiné, ou de la chaleur produite par les flux de procédé dans les installations pétrochimiques.

Livres blancs techniques

Une sélection de documents techniques à consulter.

Merci ! Votre demande a bien été reçue.
Oups ! Une erreur s'est produite lors de l'envoi du formulaire.

Défaillances de tubes liées à la chimie de l'eau

La plupart des défaillances de tubes dues à la corrosion ont une composante directement liée à la chimie de l'eau.

En savoir plus

Conservation côté eau

La principale raison de choisir la conservation humide est que le délai de redémarrage de la chaudière est bien plus court qu'après une conservation à sec.

En savoir plus

Défaillances de tubes liées à la conservation

L'oxygène est un contaminant courant de l'eau de chaudière, particulièrement corrosif pour l'acier au carbone.

En savoir plus

Préservation des HRSG

La préservation des circuits eau et vapeur du HRSG pendant les périodes d'arrêt est un objectif important pour toute centrale.

En savoir plus

Brûleurs de post-combustion

L'excès d'air dans les fumées de la turbine à gaz permet de brûler du combustible supplémentaire par post-combustion dans le HRSG.

En savoir plus

Conservation côté fumées

La corrosion côté fumées se produit pendant les arrêts. Elle est maximale dans les faisceaux de la partie froide en raison de la présence de dépôts acides.

En savoir plus
Tetra Engineering logo. Orange triangular pyramid on a black background.Tetra Engineering logo. Orange triangular pyramid on a black background.

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre centrale ou à préserver sa valeur dans le temps

Nous contacter

Publications, présentations et articles

Une sélection de publications, présentations et articles issus des grandes conférences et événements du secteur.

Titre
Auteur
HRSG Preservation During Shutdowns: A Key Issue Often Neglected
HRSG Preservation During Shutdowns: A Key Issue Often NeglectedHRSG Preservation During Shutdowns: A Key Issue Often Neglected
Misha Gadher & James Malloy
Modern Power Systems, 2026
What do HRSG tube failure statistics tell us?
What do HRSG tube failure statistics tell us?What do HRSG tube failure statistics tell us?
Misha Gadher & Mark Taylor
Modern Power Systems
Counterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGs
Counterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGsCounterfeit, Fraudulent and Suspect Items (CFSI) – Steel and HRSGs
Taylor M.
IMechE HRSG User Group 2022
Adapting Existing Thermal Desalination Plants to Produce Hydrogen
Adapting Existing Thermal Desalination Plants to Produce HydrogenAdapting Existing Thermal Desalination Plants to Produce Hydrogen
Malloy J.
2022 World Utilities Congress
Root Cause Failure Investigation of MSCV Drain Failures
Root Cause Failure Investigation of MSCV Drain FailuresRoot Cause Failure Investigation of MSCV Drain Failures
P. Jackson, A. Wholey, E. Tsai and D. Burns
ASME 2022 Pressure Vessels & Piping Conference

Projets réalisés

Forte de plus de 35 ans d'expérience dans les services liés à la production d'électricité et de vapeur industrielle, Tetra Engineering a mené de très nombreux projets.

South East Asia

Site Condition Assessment, 2015

A Tetra Senior Engineer visited a south east asian power plant site to make an assessment of the commissioning situation. The EPC engaged Tetra as they considered that their site work was being delayed due to lack of progress by the IPP to perform their scope of work.There was significant lack of communication between the two parties as well as discrepancies in the scope of work, which lead to schedule delays and cause of mutual blaming between parties.

Europe

High Energy Piping (HEP) Remaining Life Assessment (RLA), 2015

Tetra was hired by a client to investgate the remaning life of the HEP on 3 units of a thermal power station. The plant intended to operate the units for another 100,000 hours. The scope of work entailed a piping stress analysis of the main steam and hot reheat lines, thermal stress analysis of the SH header outlet/main steam line and remaining life assessment (creep, fatigue, creep-fatigue) of critical areas based on inspection history and results from the pipe stress/finite element analysis. The figure shows time-dependent stresses and temperatures during start up.

Europe

Study of impact of cyclic loads on superheater tubes, 2015

During the shutdown of the unit at night, the HP bypass was kept open to maintain a vacuum in the steam turbine condenser in order to guarantee a faster start the next morning. Therefore, a small quantity of high pressure steam from the HP drum was flowing through the SH on the way to the HP bypass valve. The small HP steam flow takes the path of least resistance and only goes through tubes on one side of the unit, affecting their temperature. The temperature of the tubes on the other side change differently and a temperature difference of around 80°C can be seen 2 hours after shutdown. The CCGT owner engaged Tetra Engineering to investigate the impact of these resultant cyclic loads on the fatigue life of the tube to header welds. The study concluded that the temperature difference of 80°C between different tubes does not cause high enough fatigue stresses alone to be considered critical

South East Asia

CFD Study of HRSG Gas Path, 2015

Tetra Engineering  performed a CFD analysis of the HRSG gas path at a CCGT in Asia in collaboration with CFD specialist R&R Consult. The results showed a very uneven flow distribution at base load over the HPHTSH tube sheet, with a higher mass flow located towards the outlet header sections and towards the side walls. The swirling motion of the GT flow results in a different flow pattern for the low load case, compared to the base load case. The flow was more evenly distributed in the longitudinal direction at the SH, but a considerable variation is seen in the span-wise direction. The uneven flow distribution was thought to be a contributing factor to the repeated fatigue failures seen in the boiler over the last couple of years.

Tetra Engineering logo. Orange triangular pyramid on a black background.Tetra Engineering logo. Orange triangular pyramid on a black background.

Nous contacter

Pour discuter de la manière dont nous pouvons vous aider à améliorer les performances de votre centrale ou à préserver sa valeur dans le temps

Nous contacter